Water jets were used to mine for gold in 1870 already. But only the progress of pumps has made it possible to increase water pressure to now cut all kinds of materials.
In the beginning of the 1980ies, mixing in solid particles was the latest innovative step in waterjet technology for the time being. It makes it possible to process virtually all materials with pure or abrasive waterjets.
Proven technology with high standard of equipment and first-class price-performance ratio.
ECOTRON® HIGH PRESSURE PUMP
ECOTRON® is available in the power classes 11 kW to 45 kW. The operating pressure of 4,000 bar is the perfect balance between long maintenance intervals and high cutting speed. ECOTRON® is our basic model with flow rates between 1.2 and 4.3 l per minute and an operating pressure of 4,000 bar.
The direct driven and energy efficient high pressure pump for your easy start in waterjet cutting!
VECTRON® HIGH PRESSURE PUMP
With the pump series VECTRON® an environmentally friendly and energy efficient unit for waterjet cutting has been created. Compared with standard pressure intensifier pumps, the energy efficiency is approx. 25% higher.
The next step in pump technology evolution: energy-saving, highly efficient and professional.
SERVOTRON® HIGH PRESSURE PUMP
SERVOTRON® is available in the power classes 37 kW and 45 kW. Its operating pressure of 4,000 bar has been considered to be the optimum in the professional waterjet cutting sector for years.
The Austrian technical control board has confirmed that up to 24 % energy can be saved with SERVOTRON® in a comparison with conventional pumps. It is available with a flow rate of 3.8 l per minute and 4.6 l per minute.
The professional pump with a high volume flow for multiple-head applications.
HYTRON® HIGH PRESSURE PUMP
EVEN PRESSURE SIGNAL FOR HIGH PRODUCTIVITY.
Proven 4,000 bar technology combined with high flow rates – greatly appreciated by the professionals. Especially for multiple-head applications, HYTRON® always ensures the required volume of high-pressure water.
HYTRON® provides 6.0 or 7.6 l per minute with 4,000 bar. Whether you are using two or four abrasive cutting heads simultaneously, HYTRON® provides continuously adjustable pressure from ten to 4,000 bar. The two chamfered pressure intensifiers create an optimal cut.
Increase the productivity of your existing waterjet cutting systems by at least 30 %.
HYPERTRON® HIGH PRESSURE PUMP
With HYPERTRON®, you can reach a 30 to 50 % higher cutting speed and energy efficiency combining servo technology with ultra-high pressure.
The HYPERTRON® provides flow rates of 3.5 l per minute with 6,000 bar or 4.6 l per minute with 4,000 bar. Whether you want to work with two cutting heads or only with one cutting head, HYPERTRON® provides the right pressure – from 100 to 6,000 bar. Flexibility and high performance in one.
ORIGINAL BFT ACCESSORIES
We test the accessories that we manufacture and sell for quality, reliability and functionality at our plants.
If you want to build good pumps, you cannot ignore the environment of pump technology. Every reliable pump also includes high quality installation material, cutting heads and abrasive accessories.
Every production chain is only as stark as its weakest link.