High Pressure Pump
THE DIRECT DRIVEN AND ENERGY EFFICIENT HIGH PRESSURE PUMP FOR YOUR EASY START IN WATERJET CUTTING!
With the pump series VECTRON® an environmentally friendly and energy efficient unit for waterjet cutting has been created. Compared with standard pressure intensifier pumps, the energy efficiency is approx. 25% higher.
Customers buy European products
- because they are adjusted to the requirements of European companies.
- because they are designed taking into consideration a responsible treatment of our resources.
- because they are easy to service and all common metrical tools match.
- because they meet European standards and quality expectations.
The new drive system
IMPROVED PERFORMANCE – LESS ENERGY INPUT
A crankshaft is driven via a frequency-controlled electric motor. The water is brought to pressure via three pistons connected to the crankshaft. The installed booster pump and the double pre-filter unit with 5 μm und 1,2 μm, guarantee optimum feed water supply.
The combination of a frequency-controlled crank drive and built-in pulsation damper according to Pressure Equipment Directive 2014/68/EU, with a reservoir capacity of 0.88 litres, enables a harmonic pressure curve with fluctuations of less than 1% of the maximum operating pressure. This has a positive effect on the cutting result, especially in abrasive waterjet cutting.
- Power supply: 22 kW
- Permissible operating pressure, max.: 3.500 bar
- Flow rate, max.: 3,5 l/min
ADVANTAGES AT A GLANCE
No pressure overload and minimal pressure drop at On/Off mode of cutting head. Reduced current consumption and increased energy efficiency.
The pressure release valve is installed within the high pressure line of the pump. The valve is activated via the stop button or the emergency stop circuit. A bypass valve is available as an option. This means that, if necessary, e.g. for abrasive waterjet cutting, the connection pressure can be continuously adjusted from 50 MPa.
The pump is touch screen controlled. The VECTRON® high pressure pump is continuously adjustable between 50 and 400 MPa. All warnings and monitoring functions are displayed in clear text. Operating data are logged and can be accessed via the display.
All important functions can be remotely controlled via client access. External connectors are available for start/ stop, emergency stop circuit, bleed down valve, malfunction and operating messages.
All functions can also be controlled via UDP protocol. This only requires a connection via a network cable. As an option, control via Profinet or other Fieldbus systems is also possible.
The VECTRON® control
Electronic control with meaningful extras as standard:
- Ease of use with touchscreen.
- Display of the functions in plain text.
- Operating data are logged and can be accessed via the display.
- Different languages available.
DO YOU WANT MORE INFORMATION?
If you have any more questions about the VECTRON® please download the catalogue and the presentation. You can also contact us personally – by telephone or with our online form.